Free referral service for metal roofing in Jacksonville and Northeast FloridaCall: (904) 720-8470
Call (904) 720-8470

Standing Seam Metal Roofs in Jacksonville

Standing seam metal roofs in Jacksonville have no exposed screws on the panels, and they're the go-to metal roof near the ocean.

Free referral service. Not a roofing contractor. We connect you with an independent, Florida-licensed roofing contractor.

Coastal home near Jacksonville Beach with a silver standing seam aluminum roof

Standing seam metal roofs in Jacksonville use long vertical panels that run from the ridge to the eave. Where two panels meet, their edges rise into a seam about one to two inches tall. Clips hidden under the seam hold the panels to the deck, so the flat of the roof has no screws through it.

Snap-Lock vs Mechanically Seamed

On snap-lock panels, one edge snaps over the next by hand. On mechanically seamed panels, a seaming tool folds the two edges together once or twice. Folded seams are stronger and are often what the panel's Florida approval needs for higher wind pressures and lower roof slopes. Ask which one the quote is for and what it's approved for.

Steel or Aluminum Near the Beaches

Most steel panels are coated with Galvalume, an aluminum-zinc alloy, and salt spray shortens its life. Metal Sales' Galvalume warranty, for one, excludes areas within 1,500 feet of salt water. Aluminum is the usual choice at Jacksonville Beach, Atlantic Beach, Neptune Beach and Ponte Vedra, and one panel supplier requires it within 300 feet of breaking surf. Aluminum warranties have coastal limits too, so get the warranty's coastal terms in writing for your address.

Standing Seam Metal Roof Cost in Jacksonville

HomeGuide's national averages put standing seam at $9–$16 per square foot installed, or about $18,000 to $32,000 for a 2,000 square foot roof. Aluminum and mechanically seamed panels land at the high end. See metal roof cost in Jacksonville.

What to Ask

  • Panel material and thickness (gauge for steel, inches for aluminum), and the paint system.
  • Snap-lock or mechanical seam, panel width, and the Florida Product Approval number.
  • Clip type and spacing for your house's wind zone.
  • Whether the warranty holds at your distance from salt water.

Want a different look? See metal shingle roofs in Jacksonville. To price standing seam metal roofs in Jacksonville, call (904) 720-8470 for a metal roofer in Jacksonville.

Sources: Metal Sales Galvalume warranty, Sheffield Metals (2025), McElroy Metal (2021, 2024), HomeGuide metal roof cost, Florida Product Approval search, Cool Roof Rating Council.

Call (904) 720-8470 for a Metal Roofer in Jacksonville

One free call connects you with a Florida-licensed roofing contractor that installs metal shingles, standing seam and 5V crimp roofs in Jacksonville.

Free referral service. Not a roofing contractor. We connect you with an independent, Florida-licensed roofing contractor.

Call nowRequest